Rīgā: +371-20044707 vai +371-20370707 (Darba dienās 9:00 - 17:30)

Meross CS11-EU smoke and carbon monoxide detector

CS11-EU
Preces ID:1606091
2970 
Piegādātāja noliktavā: 70 prece(s)
Piegāde
Apmaksas veidi
Mūsu priekšrocības

24 mēnešu garantija

SMS / E-pasta paziņojumi

Preču atgriešana 14 dienu laikā

Dažādi maksājuma veidiPay orders in convenient ways: cash to the courier, by bank transfer on the receipt of the bank or by credit card right at the time of the order.

Godīga cenaLepojamies, ka arī juridiskām personām esošā cena ir bez kādiem papildus maksājumiem!

Meross CS11-EU smoke and carbon monoxide detector

Meross CS11-EU is a compact yet highly effective sensor equipped with two independent sensors - photoelectric for smoke detection and electrochemical for CO monitoring. Such a solution guarantees a quick response to an emergency! At the same time, the device is small and unobtrusive, and its built-in CR123A battery provides a long operating time - up to about 10 years.

Immediate response to danger

The sensor meets EN14604 and EN50291 standards, which confirms its effectiveness and quality of operation. The device responds automatically when CO levels reach dangerous values - for example, at a concentration of 300 ppm the alarm sounds in less than 3 minutes. A loud signal of more than 85 dB guarantees that the device will be heard even by sleeping household members.

Reliability and precision

If the sensor detects both smoke and carbon monoxide, it will first beep for smoke and then for CO. What's more, the device detects both fast and slow-burning fires, minimizing false alarms.

Simple installation without cables

The detector is powered by a built-in 3V CR123A battery with a lifespan of up to 10 years. This, combined with its clever design, makes its installation take no more than a few minutes and does not require the help of an electrician. All you have to do is screw the mounting bracket to the ceiling or wall, then place the device in it - and you're done!

Intuitive light signaling

Meross CS11-EU is equipped with a three-color LED that clearly communicates the status of the device. A green light indicates readiness for operation, an amber light indicates a low battery or fault, and a red light indicates alarm activation or test mode. Operation of the sensor is extremely simple - just press one button to perform a test or silence the alarm.

Thoughtful design and discretion

The slim, white housing with a round shape makes the sensor blend in perfectly with any interior. Thanks to its compact size, it is unobtrusive while effectively protecting you and your loved ones from an invisible threat.

Included

  • Smoke and carbon monoxide detector
  • Mounting bracket
  • Set of screws
  • User manual

 

ManufacturerMeross
ModelCS11-EU
CertificationsEN14604:2005/AC:2008, EN50291-1:2018
Sensor typeSmoke: photoelectric; CO: electrochemical;
Power supplyCR123A DC 3 V lithium battery (1600 mAh, non-replaceable)
Operating current<30 uA (standby), <70 mA (alarm)
Alarm volume level85 dB(A) at a distance of 3 m
Smoke sensitivity0.09-0.17 dB/m
Sensitivity to CO50 ppm - 60-90 min; 100 ppm - 10-40 min; 300 ppm - < 3 min;
Low battery level2,6 ± 0,1 V
Mute timeApprox. 10 min
Operating temperatureFrom -10°C to 40°C
Working environment humidity15-95% RH, no condensation


Ražotājs:
MEROSS
Tevi varētu interesēt