Sndway2 Coating Thickness Gauge
| Coating thickness meter Digital paint coating thickness detector allows you to check the thickness of the paint or varnish layer on magnetic (iron, steel) and non-magnetic (aluminum, copper) surfaces. It is used for non-invasive test of automotive coating. It is also intended for measuring the thickness of non-magnetic coatings (including paint, varnish, glass, plastic, rubber, enamel, etc.) on steel, galvanized steel and aluminum. The gauge can be used to check the thickness of the varnish layer before starting the polishing process. It has a wide measurement range (up to 1700 µm), quickly performs measurements and prepares for a new measurement. Suitable for use in car workshops, service stations, vehicle inspection stations, used car sales, paint shops and other diagnostic areas. Features: Non-invasive magnetic measurement technology. The meter is calibrated, calibration plates are included in the kit for checking the accuracy. Selectable measurement units (1mil=25.4µm; 1µm=0.03937mil). Saving the measured datum up to 30 sets, power-off will not obliterate datum. Clear 2-inch illuminated display with battery charge level indicator. The screen can be rotated 180 degrees for easier reading of measurement data. Single/continuous measurement. Warning function of upper/lower limits. Automatically shuts off after 60 seconds. Informs about the measurement results with an acoustic signal. It measures the surface of iron, steel, galvanized steel, copper and aluminum - suitable for use in industry and household. Ergonomic shape, comfortable to hold in hand, durable body. Comes with a handy black zippered carrying case. Technical data: Measuring range: Magnetic material 0~1700 µm; Non-magnetic material 0~1700 µm. Measurement resolution: 0.1µm @(0~99.9µm); 1µm @(100~1700µm). Indication error: +/-(2+2%*H)µm @(0–500µm); +/-(2.5%*H)µm @(500–1700µm). Min. measuring area: 25x25mm (magnetic/non-magnetic materials). Min. curvature: convexity 5mm; concave 30mm. Min. substrate thickness: Magnetic materials 0.2mm; Non-magnetic materials 0.05mm. Measurement units: mil / µm (1mil=25.4µm; 1µm=0.03937mil). Batteries: 2x 1.5V AAA (included). Data storage: 30 sets. Operating temperature: 0°C ~ +50°C. Operating humidity: 10-80% RH. Storage temperature: -10°C ~ +60°C. Storage humidity: 10-70% RH. Calibration: zero-spot calibration / calibration-film calibration. Limiting value measurement: Yes. Automatic device shutdown: within 60 seconds. Gauge size: 120x52x26 mm. Carrying case size: 200x110x45mm. Box size: 28x54x11mm. Weight: 87g. The set includes: gauge, batteries 2x AAA, handstrap, carrying case, tool box for storing calibration films, 5x calibration films of different thicknesses, FE (iron) substrate, NFE (aluminum) substrate, user manual. Warranty: 24 months.   |
Mарка:
SNDWAY2
